Dilute Dispense

Equipment to automatically dilute chemicals

There are two main types of proportioning unit:

The Bucket Fill or Blend Centre Proportioners work on the venturi principle. They are available in many configurations are quality dilution units that should give trouble free operation if installed and maintained correctly.
The Proportioners provides a safe, controlled and economic method for dilution of chemical into an open container, i.e. bucket, sprayer, sink.
It is not suitable for feeding hoses longer than 1 metre, brushes, piped or valved systems.
These simple proportioners require no electricity and are driven by the water flow; note: the maximum water temperature is 80°C. The unit is self-priming and gives an accurate and adjustable dilution if fed with a consistent water pressure.

The Dosatron Proportioner provides a safe, controlled and economic method for dilution of chemical into either an open container, i.e. "bucket fill", or into sprayers, brushes or piped and valved systems.
These simple proportioners required no electricity and are driven by the water flow; they are self priming. The units give an accurate and adjustable dilution for a wide range of flow.
A range of proportioners is available to suit the required flow and dilution range.

Note: Water Authority regulations state that no chemical dilution equipment may be connected directly to the mains supply. A break in the supply using a type "A" air gap is required.